Nvidia Last Minute Price Cuts Potentially Lead To Bad GeForce RTX 4070 Coolers

Expert Verified By

Last Minute Decision Forced Custom Board Partners!

The GeForce RTX 4070 was initially planned to launch with an MSRP of $749, which was later cut down to $599 to make it an exciting option to buy. But cutting the price at the last moment does have its problems.

The price cut to $599 might have created many manufacturing problems for Nvidia partners. This might have led Nvidia partners to launch cards under MSRP that is poorly designed but still functional.

That does not mean that poorly designed cards will not cause problems in the future.

Looking at the PCB on the Nvidia GeForce RTX 4070 Founders Edition already points to many manufacturing problems for cost-cutting. The PCB of the GeForce RTX 4070 Founders Edition offers a risky design that has 6 power phases with 6 voltage converters that are scattered on the PCB.

Being a 200W TDP card, these 6 power phases with 6 voltage converters on the GeForce RTX 4070 Founders Edition get hot and need active cooling. The only solution to this problem would be a higher-cost heatsink design. Nvidia developed a heatsink with 10 anchor points with screws near the 6 power phases with 6 voltage converters.

As a result, the temperatures on the VRM are within spec on the Founders Edition. The Hotspot temperature on the Founders Edition GeForce RTX 4070 is up to 83.68 ºC, while the PCB and VRM temperatures stay under 70 ºC and 75 ºC, respectively. The same cannot be said about Nvidia partners, who must also stick to the $599 price point.

Unlike Nvidia, custom board partners have to source both the chip and VRM from Nvidia. This leaves little profit margin, which varies between 2% and 5%. This has caused some manufacturers to develop custom GeForce RTX 4070 models that offer subpar cooling for the risky power delivery design.

With a simpler heatsink design and fewer anchor points on the MSRP custom models, the VRM is at the mercy of the weight of the heatsink without pressure, rather than the 10 anchor points used on the Funders Edition. This issue will somewhat be resolved by installing the card vertically though most users will install it horizontally.

In a horizontal position without the 10 anchor points, the card’s heatsink will pull down on the thermal pads and lift them off by a millimeter, resulting in poor contact. This has resulted in alarming temperatures on some of the MSRP custom models of the GeForce RTX 4070.

The hottest point on these custom variants has been recorded at 106 ºC, while the VRM temperature is also above the Founders Edition, around 90 ºC to 100 ºC. These kinds of temperatures for components are still within specs but are dangerously close. The max safe rated temperature for VRM is 120 ºC.

Higher temperatures like these will operate fine and will continue to do so over the years, but it is certainly not good for the longevity of the components. Manufacturers would also not change the heatsink design if the components running at high temps are still within specified safe temperatures.

For now, it might be better to avoid custom GeForce RTX 4070 models that offer the Nvidia suggested price of $599, aside from the Founders Edition.

Was our article helpful? 👨‍💻

Thank you! Please share your positive feedback. 🔋

How could we improve this post? Please Help us. 😔

Join Our Community

Still having issues? Join the Tech4Gamers Forum for expert help and community support!

Latest News

Join Our Community

104,000FansLike
32,122FollowersFollow

Trending

Avowed Art Director Calls Gamers ‘Sickos’ Following Pronoun Criticism

One of the major Avowed developers has found himself at odds with some fans, using harsh words after criticism of pronouns.

Z790 Motherboards Black Friday Deals You Can’t Miss

Discover unbeatable Black Friday 2024 deals on Z790 motherboards, perfect for gaming and high-performance builds. Don't miss out on DDR5, PCIe 5.0, and top-tier features at discounted prices!

Indiana Jones Retail Pre-Orders Reportedly Fall 86% Behind Dragon Age: The Veilguard

An insider reveal that during the same pre-launch period, Indiana Jones retail pre-orders were 86% behind those of Dragon Age: The Veilguard.

The Witcher 4 Has Entered Full-Scale Production

CD Projekt Red just recently confirmed that The Witcher 4 has been moved to full-scale production, meaning the development is going smoothly.

Recurring Unreal Engine 5 Issues Are Getting Tiring, Say Analysts

Digital Foundry revealed in the latest video that they are tired of the constant Unreal Engine 5 issues in every game.